Currently, the Navimow i2 LiDAR Pro uses its camera system and LiDAR for edge cutting, allowing it to detect and follow physical boundaries in real-time. This system adapts to real-world conditions and dynamically adjusts to boundaries. However, performance can be influenced by environmental factors, which may lead to occasional deviations from the boundary.
To enable Edge Mowing, go to App Home > Settings > Map management > Edit > Edge Mowing. Once enabled, Navimow i2 LiDAR Pro will automatically perform edge mowing three times at the start of each mowing task, including along the edges of Off-Limit Islands.
Suggestions for Improvement:
To ensure the performance of Edge Mowing, remove obstacles from the boundary.
If the Navimow i2 LiDAR Pro frequently deviates from the boundary, please contact us at support-navimow@rlm.segway.com (for EU users) for assistance.
To enable Edge Mowing, go to App Home > Settings > Map management > Edit > Edge Mowing. Once enabled, Navimow i2 LiDAR Pro will automatically perform edge mowing three times at the start of each mowing task, including along the edges of Off-Limit Islands.
Suggestions for Improvement:
To ensure the performance of Edge Mowing, remove obstacles from the boundary.
If the Navimow i2 LiDAR Pro frequently deviates from the boundary, please contact us at support-navimow@rlm.segway.com (for EU users) for assistance.
Comments
0 comments
Article is closed for comments.