If the Navimow H2 is used regularly, it is recommended to replace the blades and screws every 80 working hours to ensure safety and better mowing results. Wear heavy-duty gloves when you check or service the blade. Follow the steps below:
1. Press the OK button for 3 seconds to turn off the mower.
2. To avoid scratching, place the Navimow H2 on a soft and clean surface in an upside-down position.
3. Use a cross-tip/Philips head screwdriver to loosen the three screws.
4. Remove the screws and blades.
5. Fasten the new blades and screws. Make sure the blades can pivot freely.
1. Press the OK button for 3 seconds to turn off the mower.
2. To avoid scratching, place the Navimow H2 on a soft and clean surface in an upside-down position.
3. Use a cross-tip/Philips head screwdriver to loosen the three screws.
4. Remove the screws and blades.
5. Fasten the new blades and screws. Make sure the blades can pivot freely.
Comments
0 comments
Article is closed for comments.